Connect to BSNL Broadband using Router

Configure Beetel 110TC1 ADSL2+ Router for BSNL

Open http://192.168.1.1 in your browser. Use the following username password to login

username : admin

password : admin or password

You should be greeted with the Beetel 110TC1 configuration page.

Click on Interface Setup

For Virtual Circuit, you can choose either the default PVC0 or PVC2. If you choose PVC0, then you need to set VPI = 0 and VCI = 35 (This is specific to BNSL).

 If you choose PVC2, the default values are 0 and 35.

NB :- For me  Virtual Circuit:  Status PV0 is Deactivated with VPI = 1 and VCI = 32

  

PVC2 status Activated with VPI = 0 and VCI = 35

Servicename : BSNL

Username:uname

Password: password

Encapsulation:  PPPoE LLC

Bridge Interface: Deactivated

Get IP Address: Dynamic

Under the ‘PPPoA/PPPoE’ section enter the user name/password combination provided by BSNL. For me the username as first two characters of my first name follower by my telephone number along with the STD Code. That is ni80xxxxxxxx. The password is ‘password’.

Save your changes.

The next step is to set the DNS entries, navigate to the sub-tab ‘LAN’ under ‘Interface Setup’.

Under DHCP, change the DNS Relay to ‘Use ZAuto Discovered DNS Server Only’.